A simple bench any one can make?

    


That's a bold title and statement but, I believe the majority of people who read this , and want to make one, could do so. Time is always against me, and with the fact that I have just moved home , needing furniture and me being me! I have to build it myself, With the limited time I have.
Next on my list to make was a TV unit. I wanted something quick and easy. A bench seemed like a good idea. It would house my TV, and I had no use for an under shelf, since I don't use a DVD player or cable box , everything gets streamed . 



So I thought perfect! It'll do for now , and if I choose to make a TV unit in the future, the bench can be used else where in the house. When you think about , a bench can be used for a lot . Extra seating, shoe bench, coffee table, end of bed bench, a side table and im sure there's more uses, that you can think of!

Original I was going to use one wide, thick slab for the top, but after much debate, I decided to use what I had to hand, and saved myself money, time and 2 hour journey. In this instance I had oak boards (170 x 20mm) and some 50mm thick Oak scrap.

Traditionally the top of the bench was a softer wood and a hardwood was used for the legs. But as I've said I wanted to use materials I already had. The bench is/was an experiment in design, speed and strength. And I think it turned out alright . I learnt a few things and had some fun doing so.
Below is a brief summary of how I made the bench and a YouTube video, for those who want to watch the process.



I started with 2 boards (170 X 20mm) . I cut these to 1219mm, and added a chamfer to the inside edge join. I cut the 2 underside lats to 320mm and cut a bevel on each side, and cleaned them up with the plane.



I clamped the 2 boards together , marked out for the pilot holes to receive the rose head nails and began drilling them. 



Normally I would glue boards together but, for quickness and experimentation, I didn't . On the underside I measured down from each end 160mm and squared a line across the boards, this line is to set the lat underneath ready to be drilled and secured. I cleaned up the boards before I added any nails. I lined up the lat underneath, and used 2 nails to secure it, while I drilled the rest of the pilot holes. I added the nails, then I removed the 2 nails I used to hold the board and drilled the rest of the pilot holes and added the remainder of the nails, I then clenched the nails ( bent them over ).


I marked the corners and rounded them off with my chisel. I then followed up with my Shinto rasp and sandpaper.



I marked out for the round tenon holes, 85mm (centre of each board) . I marked out the sight lines (32°) and set a bevel at 15°. I used a 32mm bit and began to drill. I stopped and checked often to see I was drilling at 15°. 



Next I started the legs. I cut these at 50 X 50mm. I measured down 70mm then squared a line around the leg, I measured down 25mm from the first line , and squared another line around. The first line was to cut the shoulders of the tenons. I removed the cheeks which left me with a square tenon.



I removed all corners of the tenon with a saw which created more corners. I then paired down all the corners with a chisel. 



I used a Shinto rasp and some 60 grit sandpaper , to finish rounding off the tenon. As I done this I checked the fit of the tenon often .



Once the tenons where cut I began to add bevel to the shoulders , this is so the shoulders won't stop the tenon fully fitting.



I shaped the legs next . I drew a circle on the bottom of the legs ( 32mm ), then I removed each corner of the legs, bevelling down to the circle I drew. I removed as much material as possible with a axe then finished up with the plane. 





I then planed all the face sides down the circle. I split some wedges from the off cuts of the rails . I glued and wedged the legs and cut of the butts of the tenons . 


I wedged the legs level, and used a scrap piece of wood as a guide. I cut just over half way.



I then turned the bench upside down, and finished all the cuts. I also put a small chamfer on each leg, to stop the legs catching on anything and splintering.



A final sanding and some osmo oil and hey presto! One bench!



Since building the bench, I think there may be another one being built. There so useful and adaptable around the house , and of course easy to build.


Comments

  1. Thank you very much, it´s really a great article and video, It´s very generous of you to share this work and experience.
    Personally I loved this simple design as a furniture piece, but I can´t wait to use it as a workbench.
    Cheers from Colombia.

    ReplyDelete
  2. You have mentioned some of the most usefull information in the above content. Definetly loved it. We help you to design complete interior design for your home interior. Are you looking for Best Interior Designers in chennai then choose us

    ReplyDelete
  3. Caesars Entertainment Launches 'Caesars
    Caesars Entertainment launched 넷마블 포커 its new 이빨빠지는꿈 Caesars Entertainment properties in Las Vegas, NV. Caesars Entertainment will open its doors 강원랜드 쪽박걸 at 식스 먹튀 Harrah's 슬롯 꽁 머니 Las Vegas on

    ReplyDelete
  4. For a limited time, readers can save and decorate with roller shades if they make a visit Window Shades

    ReplyDelete
  5. Also remember to lie in the mattresses together. The pressure your partner exerts also has an effect on you and this is not something you'd like to discover at home. truck mattress

    ReplyDelete
  6. Curtains that are not correctly fitted or are to small or big for your window can severely detract from the look you are trying to achieve. Chopping boards Australia

    ReplyDelete
  7. cool stuff comes from extraordinary content... Good that you gave this information here...

    ulule
    podomatic
    ello
    leetchi
    cs-cart radolabs
    <a href="https://pbase.com/ranusha2015/

    ReplyDelete
  8. Wood works needs some of the finest plywoods, venus use finest plywoods for Modular kitchen in chennai , no compromise in quality.

    ReplyDelete
  9. our equipments are highly precision and we don't focus on cheap materials. Radolabs is the scan centre chennai
    with top rating

    ReplyDelete
  10. Best content ever created by unplugged wood working. We produce similar content like this pls visit us too.

    chennai media news
    healthcare news chennai
    designing news chennai
    chennai business news

    ReplyDelete
  11. Alphabetic documenting is the most widely recognized recording framework for under 5,000 records. Documenting by alphabetic request is a framework where you orchestrate records by names of people, organizations, foundations, offices, subjects, points or geographic areas as per word reference request. Best filing system for home

    ReplyDelete
  12. This article that you mentioned is quite beneficial. The pictures you shared have motivated me to buy one and make one. You addressed every important aspect of good and high-quality furnishings. Both the business and the home benefit from having furniture. The info you posted will be helpful to anyone looking to select high-quality office furniture. Thank you for sharing the valuable article.

    ReplyDelete

Post a Comment

Popular posts from this blog

Using the notch accessory for the Roman workbench.

Using the roman workbench

Roman workbench perfection?