Dovetail strength.



In the past few years I have built several pieces of furniture with single corner dovetails. When I say single corner joints I mean multiple dovetails fixing two or three pieces of wood together "A single corner" . There is always sides unsupported, Never a full shape like a square .

I haven't seen a lot of examples of single corner furniture. Maybe because 4 corner dovetail construction, has been around for so long and has stood the test of time. The like of chests and drawers constructed with dovetails are common , and it is also common to see these examples with some age to them, with some examples from the 1700s still standing . This is because the dovetail joint is a strong joint and has been around since 3000bc , and has been seen in early Egyptian furniture.

So if the above examples can last for all that time , it gives good indication that, single corner dovetail construction is viable if used with careful thought.


Some time ago I built my second chair which , uses dovetails to connect the seat and backrest. While the chair doesn't look great, and the dovetails aren't neat, they  are rock solid , still after 2.5 years of daily use, with no sign of movement.

You can imagine the stress, that is imposed upon the backrest of a chair. Daily use with people leaning back on it, the chair being drag and picked up by its backrest. Yet , still the dovetails are as strong as the day the glue dried on the joints.



Another good example of this type of construction is a side/serving table. Again this is not a full square created but , a 'U' shape. The table was made so I could eat my meals off it, while sitting on the sofa. This was due to a lack of space for a dining table. At the time I was in a rush (as always), so building it the way I did , was quick. And I was sure the dovetails would be fine. Surely enough I was right. Same again, there was daily use with the table. It was sat on, stood on as a step up, used as a  foot rest, a coffee table and a serving table. 


It's a very useful table, with many uses. The table received lots of abuse , and still the dovetails haven't budged .


Also very recently, I built a sofa containing dovetails. Although there is a full square , there is a large portion unsupported . The unsupported section supports like a back rest. And recently supported 2 person's without any problems.


 Although the sofa is new, I've no doubt it will last for years. 


I have also just built a coffee table , which is a bigger version of the serving tables. To look at it , you'd think it would break easily but, you can stand on it and sway back and forth (yes, I did do this) and it doesn't budge. Yet another example of the strength of dovetails.


So can you build furniture with single corner dovetails? Most definitely. Is it the best option? No, definitely 4 corner construction is stronger. However with the experience I've had , it is viable to use this construction. Obviously, there are limitations but, I'll have no hesitation to use this construction in the future.

If you are going to construct something with 2 or 3 sides, I would recommend the following

The dovetails should be multiple . For example instead of 1 or 2 in a 100mm board ,try to fit 4 or 5 . Adding extra will add considerable strength.

Use 80° dovetails. These are easier to cut and considered more for general purpose. And in my opinion stronger then stepper angles.

Have tight fitting joints. In my opinion dovetails should have to be tapped home lightly with a mallet/hammer or your fist.

Use PVA glue. In my experience PVA is stronger . I've never had much luck with cold hide glue. And I can't comment on hot hide glue. But, I've never been let down with PVA glue, I can't say the same for cold hide glue.

Have some faith in your dovetails and you'll not go far wrong. Happy dovetailing!

You can also watch me build the coffee table in a YouTube video, which has a lot of detail, on how I make my dovetails, with minimal tools and a simple low bench.


Comments

  1. I read this article, it is really informative one. Your way of writing and making things clear is very impressible. Thanking you for such an informative article. How to Make A Wooden Sword

    ReplyDelete
  2. This is excellent information which is shared by you. This information is meaningful and magnificent for us to increase our knowledge about it. Keep sharing this kind of information. Thank you. Shop Kitchen Wall Shelves Online UAE

    ReplyDelete
  3. Corner furniture ideas can often make the most of all the space in a room. If you place a desk against one wall, you take up one whole side of the area. However, if you have an awkward corner, you can always position your workspace there. A simple triangular shaped desk would be the perfect use of the corner. Shop office furniture Brisbane at Ikcon at affordable prices & choose the best furniture product for you.

    ReplyDelete
  4. When you're at work, getting up and moving around is crucial. This is especially important across short distances when you might otherwise have to stand up and bridge the gap. I think it's reasonable to say that most of us would find it quite inconvenient if we had to get out of our chair and walk a small distance to clear up a misunderstanding with one of our coworkers. A set of well-constructed chair wheels should be part of an ergonomic office chair’s is the right choice for every one.

    ReplyDelete
  5. This is excellent information which is shared by you. This information is meaningful and magnificent for us to increase our knowledge about high back chair. Keep sharing this kind of information. Thank you.

    ReplyDelete
  6. This article gave me a lot of useful knowledge about boomerang office furniture. The material is both informative and useful. Thank you for making this information available. Keep up the excellent job.

    ReplyDelete
  7. I admire this article for the well-researched content and excellent wording. Read more info about business furniture. I got so involved in this material that I couldn’t stop reading. I am impressed with your work and skill. Thank you so much.

    ReplyDelete
  8. Thanks for publishing such great information. You are doing such a great job. This information is very helpful for everyone. Keep sharing about furniture assembly in london. Thanks.

    ReplyDelete
  9. You are providing good knowledge. It is really helpful and factual information for us and everyone to increase knowledge about Hammocks and swing chairs. Continue sharing your data. Thank you.

    ReplyDelete
  10. You have done good work by publishing this article here.carved wood furniture I found this article too much informative, and also it is beneficial to enhance our knowledge. Grateful to you for sharing an article like this.

    ReplyDelete
  11. I read the above article and got some knowledge from your article which is about for us. It's actually great and useful data for us. Single Slab Wood Table Thanks for sharing it.

    ReplyDelete
  12. Thanks for your great information, the contents are quiet interesting.Keep updating more information from your blog.I will be waiting for your next post
    Custom Sideboards

    ReplyDelete
  13. Corporate event planning denver involves organizing and managing business-related events such as conferences, meetings, or company celebrations. Professionals in this field handle logistics, venue selection, catering, entertainment, and overall event design, ensuring each aspect aligns with corporate goals and creates a memorable experience for attendees.





    ReplyDelete

Post a Comment

Popular posts from this blog

Using the notch accessory for the Roman workbench.

Using the roman workbench

Roman workbench perfection?